Dell Alienware M16 R2 Owners Manual - Page 76
Steps, Connect the touchpad cable to the connector TPAD1 on the system board.
View all Dell Alienware M16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Steps 1. Turn the system board over. 2. Install the I/O board. 3. Install the audio board. 4. Turn the system-board assembly over. 5. Using the alignment posts, place the system-board assembly on the palm rest and keyboard assembly. 6. Replace the two screws (M2x3) that secure the audio board to the palm rest and keyboard assembly. 7. Replace the four screws (M2x3) that secure the system board to the palm rest and keyboard assembly. 8. Replace the two screws (M2x3) that secure the I/O board to the palm rest and keyboard assembly. 9. Connect the speaker cable to the connector (SPK1) on the audio board. 10. Connect the touchpad-LED cable to the connector (TPADLED1) on the system board. 11. Connect the touchpad cable to the connector (TPAD1) on the system board. 12. Open the latch and connect the keyboard-controller cable to the connector (KBBL2) on the system board. 13. Open the latch and connect the display cable to the connector (LCD1) on the system board. 14. Connect the power-button cable to the connector (PWR1) on the system board. 15. Adhere the tapes that secure the camera cable to the palm-rest and keyboard assembly. 16. Connect the camera cable to the connector (CAM1) on the system board. 76