Dell Alienware m15 R2 Service Manual - Page 14
Installing the M.2 2230 solid-state drive
View all Dell Alienware m15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Steps 1. Remove the screw (M2x3) that secures the M.2 thermal shield to the mounting bracket. 2. Remove the M.2 2230 thermal shield from the M.2 2230 solid-state drive. 3. Lift and remove the M.2 2230 solid-state drive from the M.2 card slot on the system board. 4. Remove the screw (M2x3) that secures the M.2 2230 mounting bracket to the palm-rest assembly. 5. Remove the M.2 2230 mounting bracket from the palm-rest assembly. Installing the M.2 2230 solid-state drive Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task NOTE: This procedure applies if you are installing a M.2 2230 solid-state drive. NOTE: Depending on the configuration ordered your computer may have up to two M.2 cards installed. Supported card configurations per M.2 card slot: 14