Dell Alienware m15 R2 Service Manual - Page 49
Power-adapter port, Removing the power-adapter port
View all Dell Alienware m15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Next steps 1. Install the system board. (only applicable when the touchpad cable has been replaced) 2. Install the right I/O-board. (only applicable when the touchpad cable has been replaced) 3. Install the battery. 4. Install the rear I/O-cover. 5. Install the 2230 solid-state drive. (if applicable) 6. Install the 2280 solid-state drive. (if applicable) 7. Install the base cover. 8. Follow the procedure in After working inside your computer. Power-adapter port Removing the power-adapter port Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) 5. Remove the rear I/O-cover. 6. Remove the battery. 7. Remove the right I/O-board. 8. Remove the system board. About this task The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure. Steps 1. Remove the two screws (M2x3) that secure the power-adapter port bracket to the palm-rest assembly. 2. Lift the power-adapter port bracket off the palm-rest assembly. 3. Lift the power-adapter port along with its cable off the palm-rest assembly. 49