Dell Alienware m15 R2 Service Manual - Page 50
Installing the power-adapter port, Power-button assembly, Removing the power-button assembly
View all Dell Alienware m15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Installing the power-adapter port Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure. Steps 1. Place the power-adapter port into the slot on the palm-rest assembly. 2. Place the power-adapter port bracket on the power-adapter port. 3. Replace the two screws (M2x3) that secure the power-adapter port bracket to the palm-rest assembly. Next steps 1. Install the system board. 2. Install the right I/O-board. 3. Install the battery. 4. Install the rear I/O-cover. 5. Install the 2230 solid-state drive. (if applicable) 6. Install the 2280 solid-state drive. (if applicable) 7. Install the base cover. 8. Follow the procedure in After working inside your computer. Power-button assembly Removing the power-button assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 50