Dell Alienware m15 R2 Service Manual - Page 25
Battery, Removing the battery
View all Dell Alienware m15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
11. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Main (white triangle) Antenna-cable color White Auxiliary (black triangle) Black 12. Place the wireless card bracket on the wireless card. 13. Replace the screw (M2x3) that secures the wireless card bracket to the left I/O-board. 14. Adhere the Mylar over the system board. Next steps 1. Install the rear I/O-cover. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Battery Removing the battery Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) About this task The following image indicates the location of the battery and provides a visual representation of the removal procedure. 25