Dell Alienware m15 R2 Service Manual - Page 31
Left I/O-board, Removing the left I/O-board
View all Dell Alienware m15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Left I/O-board Removing the left I/O-board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) 5. Remove the battery. About this task The following image indicates the location of the left I/O-board and provides a visual representation of the removal procedure. Steps 1. Peel the Mylar covering the system board. 2. Remove the screw (M2x3) that secures the wireless-card bracket to the left I/O-board. 3. Lift the wireless-card bracket off the left I/O-board. 31
Left I/O-board
Removing the left I/O-board
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
2230 solid-state drive
. (if applicable)
4.
Remove the
2280 solid-state drive
. (if applicable)
5.
Remove the
battery
.
About this task
The following image indicates the location of the left I/O-board and provides a visual representation of the removal procedure.
Steps
1.
Peel the Mylar covering the system board.
2.
Remove the screw (M2x3) that secures the wireless-card bracket to the left I/O-board.
3.
Lift the wireless-card bracket off the left I/O-board.
31