Dell Alienware m15 R2 Service Manual - Page 63
Table 6. System setup options-Advanced menucontinued, Table 7. System setup options-Security menu
View all Dell Alienware m15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Table 6. System setup options-Advanced menu(continued) Advanced Auto OS Recovery Threshold Control the automatic boot flow for SupportAssist System Resolution Console and for Dell OS Recovery tool. Default: 2 SupportAssist OS Recovery Enable or disable SupportAssist OS recovery. Default: Enabled Intel(R) Rapid Storage Technology Non-RAID Physical Disks Displays the disk using the Intel(R) Rapid Storage Technology. Table 7. System setup options-Security menu Security Unlock Setup Status Admin Password Status System Password Status HDD Password Status Admin Password System Password HDD password Password Change Computrace Firmware TPM PPI Bypass for Clear Command UEFI Capsule Firmware Updates Displays if the setup status is unlocked. Displays if the administrator password is clear or set. Default: Not set Displays if the system password is clear or set. Default: Not set Displays if the HDD password is clear or set. Default: Not set Enables you to set the administrator password. The administrator password controls access to the system setup utility. Enables you to set the system password. The system password controls access to the computer at boot. Enables you to set, change or delete the hard-disk drive password. Enables you to permit or deny system password or HDD password changes. Default: Permitted Enable or disable the BIOS module interface of the optional Computrace Service from Absolute Software. Default: Activate Enables you to enable or disable the firmware TPM function. Default: Enabled Enables you to control the TPM Physical Presence Interface (PPI). When enabled, this setting will allow the OS to skip BIOS PPI user prompts when issuing the Clear command. Changes to this setting take effect immediately. Default: Enabled Enable or disable BIOS updates through UEFI capsule update packages. Default: Enabled 63