Dell Dimension 8300N Owner's Manual - Page 76
reposition the arms and try again., After the hinge arms snap into position
View all Dell Dimension 8300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
www.dell.com | support.dell.com 5 Lift both hinge arms to the horizontal position. 6 Use the two view slots to align the pivot bar with the two pivot-bar slots. view slots (2) hinge arms in horizontal position pivot-bar slots (2) pivot bar NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components. 7 Pull the arms toward you until they snap into position. If the hinge arms do not snap back into position on the first attempt, slightly reposition the arms and try again. 8 After the hinge arms snap into position, lower and raise the arms two or three times to properly seat them. 76 Adding Parts