Dell Dimension 8300N Owner's Manual - Page 89
Grasp the module and pull up., Press out the securing clip at each end of the memory module connector.
View all Dell Dimension 8300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
3 Disconnect any telephone or telecommunication lines from the computer. 4 Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. 5 Open the computer cover (see page 78). 6 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. 7 If necessary, remove a memory module: a Press out the securing clip at each end of the memory module connector. b Grasp the module and pull up. If the module is difficult to remove, gently ease the module back and forth to remove it from the connector. 8 To insert a module, press out the securing clip at each end of the memory module connector. memory connector closest to microprocessor securing clips (2) connector Adding Parts 89