Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1032

www.dell.com | support.dell.com • The ABR status for the router is updated. • Save passive-interface interface into the running configuration. passive-interface default • All present and future OSPF interface are marked as passive. • Any adjacency are explicitly terminated from all OSPF interfaces. • All previous passive-interface interface commands are removed from the running configuration. • All previous no passive-interface interface commands are removed from the running configuration. no passive-interface interface • Remove the interface from the passive list. • The ABR status for the router is updated. • If passive-interface default is specified, then save no passive-interface interface into the running configuration. No passive-interface default • Clear everything and revert to the default behavior. • All previously marked passive interfaces are removed. • May update ABR status. redistribute c e s Redistribute information from another routing protocol throughout the OSPF process. Syntax redistribute {connected | rip | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] To disable redistribution, use the no redistribute {connected | isis | rip | static} command. Parameters connected rip static metric metric-value metric-type type-value route-map map-name tag tag-value Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword rip to specify that RIP routing information is redistributed. Enter the keyword static to specify that information from static routes is redistributed. (OPTIONAL) Enter the keyword metric followed by a number. Range: 0 (zero) to 16777214. (OPTIONAL) Enter the keyword metric-type followed by one of the following: • 1 = OSPF External type 1 • 2 = OSPF External type 2 (OPTIONAL) Enter the keyword route-map followed by the name of the route map. (OPTIONAL) Enter the keyword tag followed by a number. Range: 0 to 4294967295 Defaults Not configured. 1032 | Open Shortest Path First (OSPFv2 and OSPFv3)