Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 367

show config c e s View the current ROUTER BGP configuration. Syntax show config Command Modes ROUTER BGP Example Figure 12-6. show config Command Example (conf-router_bgp)#show confi ! router bgp 45 neighbor suzanne peer-group neighbor suzanne no shutdown neighbor sara peer-group neighbor sara shutdown neighbor 13.14.15.20 peer-group suzanne neighbor 13.14.15.20 shutdown neighbor 123.34.55.123 peer-group suzanne neighbor 123.34.55.123 shutdown (conf-router_bgp)# Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced support on C-Series show ip bgp c e s View the current BGP IPv4 routing table for the system. Syntax show ip bgp [ipv4 unicast] [network [network-mask] [longer-prefixes]] Parameters ipv4 unicast network network-mask longer-prefixes (OPTIONAL) Enter the ipv4 unicast keywords to view information only related to ipv4 unicast routes. (OPTIONAL) Enter the network address (in dotted decimal format) of the BGP network to view information only on that network. (OPTIONAL) Enter the network mask (in slash prefix format) of the BGP network address. (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a common prefix. Command Modes EXEC EXEC Privilege Usage When you enable bgp non-deterministic-med command, the show ip bgp command output for a Information BGP route does not list the INACTIVE reason. Border Gateway Protocol IPv4 (BGPv4) | 367