Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 415

Example 1 Figure 12-28. Command Example: show ip bgp ipv4 multicast neighbors #show ip bgp ipv4 multicast neighbors BGP neighbor is 25.25.25.25, remote AS 6400, internal link BGP version 4, remote router ID 25.25.25.25 BGP state ESTABLISHED, in this state for 00:02:18 Last read 00:00:16, hold time is 180, keepalive interval is 60 seconds Received 1404 messages, 0 in queue 3 opens, 1 notifications, 1394 updates 6 keepalives, 0 route refresh requests Sent 48 messages, 0 in queue 3 opens, 2 notifications, 0 updates 43 keepalives, 0 route refresh requests Minimum time between advertisement runs is 5 seconds Minimum time before advertisements start is 0 seconds Capabilities received from neighbor for IPv4 unicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) CISCO_ROUTE_REFRESH(128) Capabilities advertised to neighbor for IPv4 Multicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) CISCO_ROUTE_REFRESH(128) Update source set to Loopback 0 For address family: IPv4 Multicast BGP table version 14, neighbor version 14 3 accepted prefixes consume 12 bytes Prefixes accepted 1 (consume 4 bytes), withdrawn 0 by peer Prefixes advertised 0, rejected 0, withdrawn 0 from peer Connections established 2; dropped 1 Last reset 00:03:17, due to user reset Notification History 'Connection Reset' Sent : 1 Recv: 0 Local host: 100.10.10.1, Local port: 179 Foreign host: 25.25.25.25, Foreign port: 2290 BGP neighbor is 211.1.1.129, remote AS 640, external link BGP version 4, remote router ID 0.0.0.0 BGP state ACTIVE, in this state for 00:00:36 Last read 00:00:41, hold time is 180, keepalive interval is 60 seconds Received 28 messages, 0 notifications, 0 in queue Sent 6 messages, 3 notifications, 0 in queue Received 18 updates, Sent 6 updates Route refresh request: received 0, sent 0 Minimum time between advertisement runs is 30 seconds For address family: IPv4 Multicast BGP table version 14, neighbor version 0 0 accepted prefixes consume 0 bytes Prefix advertised 0, rejected 0, withdrawn 0 Connections established 3; dropped 3 Last reset 00:00:37, due to user reset Notification History 'Connection Reset' Sent : 3 Recv: 0 Table 12-18. Command Example fields: show ip bgp ipv4 multicast neighbors Lines beginning with BGP neighbor BGP version Description Displays the BGP neighbor address and its AS number. The last phrase in the line indicates whether the link between the BGP router and its neighbor is an external or internal one. If they are located in the same AS, then the link is internal; otherwise the link is external. Displays the BGP version (always version 4) and the remote router ID. Border Gateway Protocol IPv4 (BGPv4) | 415