Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1364
snmp-server host
View all Dell Force10 S50-01-GE-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1364 highlights
www.dell.com | support.dell.com Defaults As defined above Command Modes CONFIGURATION Command History Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series E-Series legacy command Usage The following example specifies the group named harig as a version 3 user requiring both Information authentication and encryption and read access limited to the read named rview. Note: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP; TCP, ICMP rules are not valid for SNMP. In IPv6 ACLs port rules are not valid for SNMP. Example Figure 54-8. snmp-server group Command Example FTOS#conf FTOS(conf)# snmp-server group harig 3 priv read rview FTOS# Related Commands Note: The number of configurable groups is limited to 16 groups. show snmp group show running-config snmp Display the group name, security model, view status, and storage type of each group. Display the SNMP running configuration snmp-server host c e s Configure the recipient of an SNMP trap operation. Syntax snmp-server host ip-address | ipv6-address [traps | informs] [version 1 | 2c | 3] [auth | no auth | priv] [community-string] [udp-port port-number] [notification-type] To remove the SNMP host, use the no snmp-server host ip-address [traps | informs] [version 1 | 2c | 3] [auth | noauth | priv] [community-string] [udp-port number] [notification-type] command. Parameters ip-address ipv6-address traps informs Enter the keyword host followed by the IP address of the host (configurable hosts is limited to 16). Enter the keyword host followed by the IPv6 address of the host in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zero (OPTIONAL) Enter the keyword traps to send trap notifications to the specified host. Default: traps (OPTIONAL) Enter the keyword informs to send inform notifications to the specified host. Default: traps 1364 | SNMP and Syslog