Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 142

www.dell.com | support.dell.com C-Series Example Figure 5-54. Command Example: show rpm on C-Series FTOS#show rpm 0 -- RPM card 0 -Status : active Next Boot : online Card Type : RPM - Route Processor Module (LC-CB-RPM) Hardware Rev : 2.0 Num Ports : 1 Up Time : 1 min, 58 sec Last Restart : reset by user FTOS Version : 8-4-2-399 Jumbo Capable : yes CP Boot Flash : A: 2.7.1.1 [booted] B: 2.7.1.1 CP FPGA Flash : A: 5.0 CP Mem Size : 1073741824 bytes MMC Mem Size : 511467520 bytes External MMC : n/a Temperature : 43C Power Status : AC Voltage : ok Serial Number : FX000037575 Part Number : 7520029307 Rev 02 Vendor Id : Y Date Code : 01342008 Country Code : 01 Piece Part ID : US-0T4VKT-76991-1BA-7575 PPID Revision : 002 Service Tag : SRVCTG9 Expr Svc Code : 626 351 582 97 Table 5-7 defines the fields displayed in Figure 5-53. Table 5-7. Descriptions of show rpm output Field Status Next Boot Card Type Hardware Rev Num Ports Up Time Description Displays the RPM's status. Displays whether the RPM is to be brought online at the next system reload. Displays the RPM catalog number. Displays theE-Series chipset hardware revision level: 1.0 (non-Jumbo); 1.5 (Jumbo-enabled); 2.0 (or above is TeraScale). Displays the number of active ports. Displays the number of hours and minutes since the RPM's last reboot. 142 | Control and Monitoring