Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 588
rate-interval
View all Dell Force10 S50-01-GE-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 588 highlights
www.dell.com | support.dell.com Usage Information Example The figure above sets a port as hybrid, makes the port a tagged member of VLAN 20, and an untagged member of VLAN 10, which becomes the native VLAN of the port. The port will now accept: • untagged frames and classify them as VLAN 10 frames • VLAN 20 tagged frames The next figure is an example show output with "Hybrid" as the newly added value for 802.1QTagged. The options for this field are: • True-port is tagged • False-port is untagged • Hybrid-port accepts both tagged and untagged frames Figure 23-23. Display the Tagged Hybrid Interface FTOS(conf-if-vl-20)#do show interfaces switchport Name: GigabitEthernet 7/0 802.1QTagged: Hybrid Vlan membership: Vlan 10, Vlan 20 Native VlanId: 10 FTOS(conf-if-vl-20)# The figure below is an example unconfiguration of the hybrid port using the no portmode hybrid command. Note: You must remove all other configurations on the port before you can remove the hybrid configuration from the port. Example Figure 23-24. Unconfigure the hybrid port FTOS(conf-if-vl-20)#interface vlan 10 FTOS(conf-if-vl-10)#no untagged gi 7/0 FTOS(conf-if-vl-10)#interface vlan 20 FTOS(conf-if-vl-20)#no tagged gi 7/0 FTOS(conf-if-vl-20)#interface gi 7/0 FTOS(conf-if-gi-7/0)#no portmode hybrid FTOS(conf-if-vl-20)# Related Commands show interfaces switchport switchport vlan-stack trunk Display the configuration of switchport (Layer 2) interfaces on the switch. Place the interface in a Layer 2 mode. Specify an interface as a trunk port to the Stackable VLAN network. rate-interval c e s Configure the traffic sampling interval on the selected interface. Syntax rate-interval seconds Parameters seconds Enter the number of seconds for which to collect traffic data. Range: 30 to 299 seconds Note: Since polling occurs every 15 seconds, the number of seconds designated here will round to the multiple of 15 seconds lower than the entered value. For example, if 44 seconds is designated it will round to 30; 45 to 59 seconds will round to 45, and so forth. 588 | Interfaces