Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1595

B SNMP Traps This chapter lists the traps sent by FTOS. Each trap is listed by the fields Message ID, Trap Type, and Trap Option, and the next is the message(s) associated with the trap. Table B-1. SNMP Traps and Error Messages Message ID Trap Type COLD_START SNMP %SNMP-5-SNMP_COLD_START: SNMP COLD_START trap sent. WARM_START SNMP Trap Option COLDSTART WARMSTART COPY_CONFIG_COMPLETE SNMP NONE SNMP Copy Config Command Completed LINK_DOWN SNMP LINKDOWN %IFA-1-PORT_LINKDN: changed interface state to down:%d LINK_UP SNMP LINKUP %IFA-1-PORT_LINKUP: changed interface state to up:%d AUTHENTICATION_FAIL SNMP AUTH %SNMP-3-SNMP_AUTH_FAIL: SNMP Authentication failed.Request with invalid community string. EGP_NEIGHBOR_LOSS SNMP NONE OSTATE_DOWN SNMP LINKDOWN %IFM-1-OSTATE_DN: changed interface state to down:%s %IFM-5-CSTATE_DN:Changed interface Physical state to down: %s OSTATE_UP SNMP LINKUP %IFM-1-OSTATE_UP: changed interface state to up:%s %IFM-5-CSTATE_UP: Changed interface Physical state to up: %s RMON_RISING_THRESHOLD SNMP NONE %RPM0-P:CP %SNMP-4-RMON_RISING_THRESHOLD: RMON rising threshold alarm from SNMP OID RMON_FALLING_THRESHOLD SNMP NONE %RPM0-P:CP %SNMP-4-RMON_FALLING_THRESHOLD: RMON falling threshold alarm from SNMP OID RMON_HC_RISHING_THRESHOLD SNMP NONE %RPM0-P:CP %SNMP-4-RMON_HC_RISING_THRESHOLD: RMON high-capacity rising threshold alarm from SNMP OID RMON_HC_FALLING_THRESHOLD SNMP NONE %RPM0-P:CP %SNMP-4-RMON_HC_FALLING_THRESHOLD: RMON high-capacity falling threshold alarm from SNMP OID RESV NONE NONE N/A SNMP Traps | 1595