Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 989

show running-config track c e s Display the current configuration of tracked objects. Syntax show running-config track [object-id] Parameters object-id (OPTIONAL) Display information on the specified tracked object. Range: 1 to 65535. Command Modes EXEC Privilege Command History Version 8.4.1.0 Introduced Related Commands show track track interface ip routing track interface line-protocol track ip route metric threshold track ip route reachability Display information about tracked objects, including configuration, current state, and clients which track the object. Configure object tracking on the routing status of an IPv4 Layer 3 interface. Configure object tracking on the line-protocol state of a Layer 2 interface. Configure object tracking on the threshold of an IPv4 route metric. Configure object tracking on the reachability of an IPv4 route. Example Command Example: show running-config track FTOS#show running-config track track 1 ip route 23.0.0.0/8 reachability track 2 ipv6 route 2040::/64 metric threshold delay down 3 delay up 5 threshold metric up 200 track 3 ipv6 route 2050::/64 reachability track 4 interface GigabitEthernet 13/4 ip routing track 5 ip route 192.168.0.0/24 reachability vrf red track resolution ip route isis 20 track resolution ip route ospf 10 Command Example: show running-config track object-id FTOS#show running-config track 300 track 300 ip route 10.0.0.0/8 metric threshold delay down 3 delay up 5 threshold metric up 100 Object Tracking | 989