Dell OptiPlex 5055 R Small Form Factor OptiPlex 5055 Small Form Factor Owners - Page 20
Installing front bezel, Storage device, Removing 2.5–inch hard drive assembly
View all Dell OptiPlex 5055 R Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing front bezel 1. Insert the tabs of the bezel into the slots on the chassis. 2. Press the bezel until the tabs click into place. 3. Install the Side cover. 4. Follow the procedure in After working inside your computer. Storage device Removing 2.5-inch hard drive assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the Side cover. 3. To remove the 2.5-inch drive assembly: a. Disconnect the SATA cable and power cable from the drive [1]. b. Push the tab to release drive assembly from the chassis [2]. 20 Field service information
Installing front bezel
1.
Insert the tabs of the bezel into the slots on the chassis.
2.
Press the bezel until the tabs click into place.
3.
Install the
Side cover
.
4.
Follow the procedure in
After working inside your computer
.
Storage device
Removing 2.5–inch hard drive assembly
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
Side cover
.
3.
To remove the 2.5-inch drive assembly:
a.
Disconnect the SATA cable and power cable from the drive [1].
b.
Push the tab to release drive assembly from the chassis [2].
20
Field service information