Dell OptiPlex 5055 R Small Form Factor OptiPlex 5055 Small Form Factor Owners - Page 31

Installing M.2 PCIe SSD, Heat sink assembly, Removing heat sink assembly

Page 31 highlights

Installing M.2 PCIe SSD 1. Insert the M.2 PCIe SSD to the connector 2. Press the blue plastic tab to secure the M.2 PCIe SSD. 3. Install the: a. optical drive b. cooling shroud c. 2.5 inch hard drive assembly d. front bezel e. Side cover 4. Follow the procedure in After working inside your computer. Heat sink assembly Removing heat sink assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. front bezel c. 2.5 inch hard drive assembly d. cooling shroud e. optical drive 3. To remove the heat sink assembly: Field service information 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73

Installing M.2 PCIe SSD
1.
Insert the M.2 PCIe SSD to the connector
2.
Press the blue plastic tab to secure the M.2 PCIe SSD.
3.
Install the:
a.
optical drive
b.
cooling shroud
c.
2.5 inch hard drive assembly
d.
front bezel
e.
Side cover
4.
Follow the procedure in
After working inside your computer
.
Heat sink assembly
Removing heat sink assembly
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
front bezel
c.
2.5 inch hard drive assembly
d.
cooling shroud
e.
optical drive
3.
To remove the heat sink assembly:
Field service information
31