Dell OptiPlex 5055 R Small Form Factor OptiPlex 5055 Small Form Factor Owners - Page 27
Installing cooling shroud, Coin-cell battery, Removing coin cell battery
View all Dell OptiPlex 5055 R Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing cooling shroud NOTE: When inserting the shroud on the processor assembly, please ensure that the data and power cables of the optical drive do not get caught inside the shroud. 1. Align the slots on the cooling shroud, with the screws on the heat sink. 2. Insert the cooling shroud over the processor assembly. 3. Install the Side cover. 4. Follow the procedure in After working inside your computer. Coin-cell battery Removing coin cell battery 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Cooling shroud c. Expansion card 3. To remove the coin cell battery: a. Using a plastic scribe press the release latch until the coin cell battery pops out [1]. b. Remove the coin cell battery from the connector on the system board [2]. Field service information 27