Dell OptiPlex 5055 R Small Form Factor OptiPlex 5055 Small Form Factor Owners - Page 35

Installing intrusion switch, Memory modules, Removing memory module

Get Dell OptiPlex 5055 R Small Form Factor PDF manuals and user guides View all Dell OptiPlex 5055 R Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Installing intrusion switch 1. Insert the intrusion switch into the slot on the computer. 2. Connect the intrusion switch cable to the connector on the system board. 3. Install the: a. cooling shroud b. front bezel c. Side cover 4. Follow the procedure in After working inside your computer. Memory modules Removing memory module 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. front bezel c. 2.5 inch hard drive assembly d. cooling shroud e. optical drive 3. To remove the memory module: a. Push the tabs on both sides of the memory module. b. Lift the memory module from the connector on the system board. Installing memory module 1. Align the notch on the memory module with the tab on the memory module connector. 2. Insert the memory module into the memory module socket. 3. Press the memory module until the memory module retention tabs click into place. 4. Close the front panel door. 5. Install the: a. optical drive b. cooling shroud c. 2.5 inch hard drive assembly d. front bezel e. Side cover 6. Follow the procedure in After working inside your computer. Field service information 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Installing intrusion switch
1.
Insert the intrusion switch into the slot on the computer.
2.
Connect the intrusion switch cable to the connector on the system board.
3.
Install the:
a.
cooling shroud
b.
front bezel
c.
Side cover
4.
Follow the procedure in
After working inside your computer
.
Memory modules
Removing memory module
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
front bezel
c.
2.5 inch hard drive assembly
d.
cooling shroud
e.
optical drive
3.
To remove the memory module:
a.
Push the tabs on both sides of the memory module.
b.
Lift the memory module from the connector on the system board.
Installing memory module
1.
Align the notch on the memory module with the tab on the memory module connector.
2.
Insert the memory module into the memory module socket.
3.
Press the memory module until the memory module retention tabs click into place.
4.
Close the front panel door.
5.
Install the:
a.
optical drive
b.
cooling shroud
c.
2.5 inch hard drive assembly
d.
front bezel
e.
Side cover
6.
Follow the procedure in
After working inside your computer
.
Field service information
35