Dell OptiPlex 5055 R Small Form Factor OptiPlex 5055 Small Form Factor Owners - Page 36
VGA Daughterboard, Removing the VGA daughter board
View all Dell OptiPlex 5055 R Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
VGA Daughterboard Removing the VGA daughter board 1. Follow the procedure in Before Working Inside Your Computer. 2. Remove the: a. Side Cover b. Bezel 3. Open the Front Bezel Door 4. To remove the VGA daughter board: a. Remove the screws that secure the VGA connector to the computer [1]. b. Slide the VGA connector to release it from the computer [2]. c. Remove the screw that secures the VGA daughter board to the computer [3]. d. Lift the VGA daughter board using the handle to remove it from the computer [4]. Installing the VGA daughter board 1. Align the VGA daughter board with the screw holder on the system board. 2. Tighten the screw to secure the VGA daughter board to the system board. 36 Field service information
VGA Daughterboard
Removing the VGA daughter board
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
Side Cover
b.
Bezel
3.
Open the
Front Bezel
Door
4.
To remove the VGA daughter board:
a.
Remove the screws that secure the VGA connector to the computer [1].
b.
Slide the VGA connector to release it from the computer [2].
c.
Remove the screw that secures the VGA daughter board to the computer [3].
d.
Lift the VGA daughter board using the handle to remove it from the computer [4].
Installing the VGA daughter board
1.
Align the VGA daughter board with the screw holder on the system board.
2.
Tighten the screw to secure the VGA daughter board to the system board.
36
Field service information