Dynex DX-40L260A12 User Manual (English) - Page 14

10 DX-32L221A12/DX-40L260A12 Making connections Using composite video (good) To connect a cable or satellite box using composite video: 1 Turn off your TV and all connected equipment. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect a composite cable ( included) to the Y/VIDEO, L, and R jacks on the side of your TV and to the composite video and audio out jacks on the cable or satellite box. The audio cables are color coded (white and red) to the L and R audio jacks. The video cable (yellow) shares a jack. with the component Y cable and goes to the green jack. Cable or satellite box Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Turn off your TV and all connected equipment. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box Side of TV A/V cable 4 Turn on your TV, then turn on the cable or satellite box. 5 Go through the setup wizard on page 18. Back of TV Coaxial cable 4 Turn on your TV, then turn on the cable or satellite box. 5 Go through the setup wizard on page 18. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables.