Dynex DX-40L260A12 User Manual (English) - Page 8

4 DX-32L221A12/DX-40L260A12 Installing the stand or wall-mount bracket Installing the stand or wall-mount bracket Notes If you plan to wall-mount your TV, do not install the stand. Store the stand and stand screws in case you want to decide to use the stand in the future. Installing the stand To install the stand: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the base to the stand, then remove the base. 3 Remove the four screws that secure the stand column, then remove the column. 2 Secure the stand to the screen with the four provided screws. Model Screw type Screw length DX-32L221A12 Q4 type 25 mm DX-40L260A12 Q4 type 25 mm 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Note The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. DX-32L221A12 (32-inch) DX-40L260A12 (40-inch) 7.84 in. (200 mm) 7.84 in. (200) mm) Installing a wall-mount bracket Warning This apparatus is intended to be supported by a UL Listed wall mount bracket. To attach your TV to a wall-mount bracket: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. Wall mount brackets