Epson 836XL User Manual - Page 109
Initialization Methods, The scanner can be initialized returned to a fixed set
UPC - 010343820098
View all Epson 836XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Initialization Methods The scanner can be initialized (returned to a fixed set of conditions) in the following ways: Type Method Hardware initialization When the scanner is turned on. When the scanner receives an INIT signal from the parallel interface: pin 31 goes LOW. Software initialization When the scanner receives a SCSI Reset signal from the SCSI interface. When software sends the ESC @ (initialize the scanner) command. When the scanner receives a SCSI Bus Device Message. Specifications Page 109
Specifications
Page 109
Initialization
Methods
The scanner can be initialized (returned to a fixed set of
conditions) in the following ways:
Type
Method
Hardware initialization
When the scanner is turned on.
When the scanner receives an
INIT
signal from
the parallel interface: pin 31 goes LOW.
When the scanner receives a SCSI Reset
signal from the SCSI interface.
Software initialization
When software sends the ESC @ (initialize the
scanner) command.
When the scanner receives a SCSI Bus Device
Message.