Epson EPL-N1200 User Manual - Page 43
Setting, Options, Description, Auto Continue
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
EPL-N1200 driver settings (continued) Setting Options Time-out Various settings from 5 to 300 seconds (60 sec. default) Toner Save ON Mode OFF Low Power ON Consumption OFF Auto Continue ON OFF Description Sets the amount of time the printer waits to receive data before terminating an incomplete print job; after the time-out period, another print job can print. Sets the amount of toner used in your print job. If you're printing a draft copy, set to ON to use around 50% less toner for a lighter printout. Sets the printer to enter a power-saving standby mode if it is not used for 30 minutes. (The printer takes about 1 minute to warm up after exiting standby mode.) Sets the printer to use Auto continue mode to continue printing 5 seconds after recovering from an print overrun or insufficient memory error. It is best to leave Auto continue OFF so you are alerted to errors; then you must press the Continue button on the control panel to resume. If you'll be away from the printer and are aware of possible errors, you can turn on Auto continue mode. 2-14 Printing With the Windows Printer Drivers