Epson EPL-N1200 User Manual - Page 65
Setup Menu, modes, select a control panel language, check the total s - toner cartridge
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Setup Menu The Setup menu items allow you to customize various printer modes, select a control panel language, check the total pages printed to date, and check or reset the toner counter. Setup menu items Menu item Interface Time Out Standby Lang Toner Toner Count Clear Page Count SelecType Init Description Sets whether the printer can receive data through all available interfaces (Auto) or only one of these: Parallel B, Parallel C, Serial, L/T, AUX Sets the amount of time the printer waits to receive data before terminating an incomplete print job; after the time-out period, it searches for new data on another interface channel: Various settings available between 5 to 300 seconds; default is 60 Turns standby mode on (or off) to reduce power used by the fixing heater when the printer is not used for 30 minutes; it warms up in about 60 seconds when a print job is received; default is Enabled. Selects the language used for control panel display messages and the status sheet: English, French, German, Italian, Spanish, Swedish, Danish, Dutch, Finnish, Portuguese Displays the amount of toner left in the imaging cartridge as follows: E****F 75 to 100 % E*** F 50 to 75% E** F 25 to 50% E* F 0 to 25% E F None For instructions on replacing the imaging cartridge, see Chapter 5. Resets the toner counter; select this menu item and press the Enter button after installing a new imaging cartridge (see Chapter 5 for details) Displays the total number of pages printed by the printer to date Resets all the SelecType settings to their factory defaults 3-14 Using the Control Panel