Epson EPL-N1200 User Manual - Page 84
Installing Memory Modules, 1MB, 2MB, 4MB, 8MB, or 32MB capacity
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
5. Connect the interface cable(s). 6. Make sure the printer's power switch is in the off position; then plug the power cable into an electrical outlet. 7. Turn on the printer. 8. Now run the Windows printer driver to add the optional paper cassette(s) to your available paper source list. See Chapter 2 for instructions. Note: If you use the Remote Control Panel utility or SelecType to control your printer, you need to select the optional paper cassette(s) only when you are ready to print. See Chapter 3 or the Technical Information manual for instructions. Installing Memory Modules To speed up printing of complex, graphics-intensive documents and downloaded fonts, you can add to your printer's memory capacity. Your printer's controller board includes two slots in which you can install single in-line memory modules (SIMMs) to increase your printer's memory up to 64MB. You can install one or two SIMMs that meet these requirements: u 72-pins u 1MB, 2MB, 4MB, 8MB, 16MB, or 32MB capacity u Maximum 70 ns access speed u Maximum dimensions: 4.25 inches (108 mm) long, 1.53 inches (39 mm) wide, and 0.4 inch (10 mm) thick. Installing Options 4-13