Epson EPL-N1200 User Manual - Page 99
Form Feed, Ready, Hex Dump, Illegal AUX I/F Card, Illegal I/F Module, Image Optimum, Manual Feed
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Form Feed The printer is off line and data remains in the printer's memory. Press Form Feed to print out the data and clear the buffer. After printing, Ready appears on the display. Hex Dump Hex dump mode is on; see page 6-7 for details. Illegal AUX I/F Card The printer cannot recognize the installed optional interface card. Turn off the printer, then remove the card and reinstall it as described in Chapter 4. This message could also indicate that you have installed both the LocalTalk/Serial module (set to use LocalTalk) and the LocalTalk Type B interface card; if so, remove one of the interfaces. Illegal I/F Module The printer cannot recognize the installed optional LocalTalk/Serial module. Turn off the printer, then remove the module and reinstall it as described in Chapter 4. Image Optimum The printer cannot print at the requested quality level because of insufficient memory. The printer reduces the quality automatically so that it can continue printing. Check to see if the printout is acceptable. If not, add more memory (for a permanent solution) or set Resolution to 300 dpi and Page Protect to OFF (temporarily). See Chapters 2 and 3 for instructions. Manual Feed paper size Manual feed mode is specified for the current print job. Make sure the indicated paper size is loaded in the built-in paper tray; then press On Line. Troubleshooting 6-3