Epson EPL-N1200 User Manual - Page 75
Installing a LocalTalk/Serial Module, Warning
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
To install any of the other interface cards listed in the table, see page 4-8 for instructions. If you will connect your printer to any type of serial interface, you need to obtain the right kind of serial cable. The table below lists the printer's specifications for serial cables. Use this cable . . . RS-232C (9 pin) to C836152 (2.0m) from mini DIN (printer) to D-SUB, 9-pin (computer) RS-232C (25 pin) to C836151 (2.0m) from mini DIN (printer) to D-SUB, 25-pin (computer) Current loop C836141 (0.4m) from mini DIN (printer) to D-SUB, 25-pin (interface cable) for both RS-232C and current loop For this serial connection . . . Direct printer-to-computer with 9-pin serial ports Direct printer-to-computer with 25-pin serial ports Cable extension for printer-to-interface connection Also be sure to read "Using a Serial Interface" on page 4-10 for instructions on configuring your computer and printer to work correctly with a serial connection. Installing a LocalTalk/Serial Module Follow these steps to install the EPSON LocalTalk/Serial module in your printer: 1. Turn off the printer and unplug the power cable from the electrical outlet. w Warning: To avoid electrical shock, do not access the printer's controller board unless the printer is turned off and unplugged from the electrical outlet. 4-4 Installing Options