Epson EX-1000 User Manual - Page 110
Printable Code Area Expansion, ESC K, Select Single-density Graphics Mode, Graphics
View all Epson EX-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
ESC I Format: Printable Code Area Expansion Comments: ASCII codes 0 to 31 and 128 to 159 are usually not printable. These codes become printable upon input of the ESC I code if n = 1, which allows the use of these codes for userdefined characters. If n = 0, this command returns 0 to 31 and 128 to 159 to non-printable codes. Graphics Note: See Chapter 6 for sample graphics programs. ESC K Format: Select Single-density Graphics Mode Comments: Turns on eight-pin singledensity graphics mode. The total number of columns = nl + (n2 x 256). ESC L Format: Select Double-density Graphics Mode Comments: Turns on eight-pin low-speed double-density graphics mode. The total number of columns = nl + (n2 x 256). A-34 Command Summary
ESC I
Printable Code Area Expansion
Format:
Comments:
ASCII codes 0 to 31 and 128 to 159 are usually not printable. These
codes become printable upon input of the ESC I code if n = 1, which
allows the use of these codes for userdefined characters. If n = 0,
this command returns 0 to 31 and 128 to 159 to non-printable codes.
Graphics
Note: See Chapter 6 for sample graphics programs.
ESC K
Select Single-density Graphics Mode
Format:
Comments:
Turns on eight-pin singledensity graphics mode. The total number of
columns =
nl + (n2 x 256).
ESC L
Select Double-density Graphics Mode
Format:
Comments:
Turns on eight-pin low-speed double-density graphics mode. The total
number of columns =
nl + (n2 x 256).
A-34
Command Summary