Epson Perfection 3200 Pro Color Management Workbook - Page 28
In the Color Management set, The SilverFast Defaults screen appears
View all Epson Perfection 3200 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
The SilverFast Defaults screen appears: 4 Make the following settings so that SilverFast can communicate color correctly to your host application. In the Color Management Section, set Scanner->Internal to ColorSync, set Internal->Monitor to Automatic, and set Internal->Output to RGB. When you see the following warning, click OK. The next settings you make will change the SilverFast Internal profile to Adobe RGB (1998) to match the host application. 3 Make sure Gamma-Gradation is set to 1.80, then click the CMS tab. The CMS Defaults screen appears: In the Profiles for ColorSync section, set the Scanner (Reflective) Profile to the profile you created for reflective scanning with MonacoEZcolor. For the Internal profile, choose Adobe RGB (1998). If you see the warning again, click OK. You can leave the other settings at their defaults. 5 When you've completed all the settings, click OK. 24