Garmin Forerunner 610 Owner's Manual - Page 45
Changing the Wrist Band, Replacing the Heart Rate, Monitor Battery
View all Garmin Forerunner 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Replacing the Heart Rate Monitor Battery 1. Use a small Phillips screwdriver to remove the four screws on the back of the module. 2. Remove the cover and battery. Appendix Changing the Wrist Band You can purchase a fabric wrist band accessory for the Forerunner (http://buy.garmin.com). 1. Use the pin tool ➊ to remove the pins ➋. ➋ ➊ 3. Wait 30 seconds. 4. Insert the new battery with the positive side facing up. Note: Do not damage or lose the O-ring gasket. 5. Replace the back cover and the four screws. After you replace the heart rate monitor battery, you must pair it with the device again. NOTE: Do not discard the pins. 2. Align the top of the Forerunner ➌ with the connector ➍. Forerunner 610 Owner's Manual 43
Forerunner 610 Owner’s Manual
43
Appendix
Replacing the Heart Rate
Monitor Battery
1. Use a small Phillips screwdriver to
remove the four screws on the back
of the module.
2. Remove the cover and battery.
3. Wait 30 seconds.
4. Insert the new battery with the
positive side facing up.
NOTE
: Do not damage or lose the
O-ring gasket.
5. Replace the back cover and the four
screws.
After you replace the heart rate monitor
battery, you must pair it with the device
again.
Changing the wrist Band
You can purchase a fabric wrist band
accessory for the Forerunner
(
).
1. Use the pin tool
➊
to remove the
pins
➋
.
➊
➋
NOTE
: Do not discard the pins.
2. Align the top of the Forerunner
➌
with the connector
➍
.