Gateway E-9525R Gateway E-9525R Server User Guide - Page 23
Removing the server from a cabinet, Back view, Front view
View all Gateway E-9525R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
www.gateway.com Back view Handle Mounting screw Front view Mounting bracket Mounting bracket Mounting screw 3 Remove the bezel lock keys from the inside of the bezel, then insert the left side of the bezel into the left handle and swing the right side of the bezel in until it snaps into place. 4 When the bezel is in place, lock the bezel by inserting the key into the lock in the lower right corner of the bezel and turning it clockwise until it stops (approximately ¼ turn). 5 Put the key in a safe place. Removing the server from a cabinet To remove the server from a cabinet: Warning Screws are required to support the front of the server. You must support the server while removing the front screws and while sliding the server off the cabinet rails. If the server is not supported, damage to the server or injury may result. 1 Remove the thumbscrews through the handles that hold the server in the cabinet. 2 While supporting the server, slide the server out from the cabinet. 17