Gateway E-9525R Gateway E-9525R Server User Guide - Page 69
Resetting BIOS passwords, jumper. To reset all BIOS settings, follow the instructions
View all Gateway E-9525R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
www.gateway.com 6 Remove the jumper across pins 1-2 of header J3-B, then place the jumper across pins 2-3. 7 Follow the instructions in "Closing the server case" on page 32. 8 Reconnect the power cords and turn on the server. The BIOS is reset. 9 Turn off the server, then disconnect the power cords and all other cables connected to the server. 10 Follow the instructions in "Opening the server case" on page 31. 11 Place the jumper back onto pins 1-2. 12 Follow the instructions in "Closing the server case" on page 32. Resetting BIOS passwords To reset BIOS passwords, you must either reset and clear all BIOS settings, or use the Clear Password jumper. To reset all BIOS settings, follow the instructions in "Resetting the BIOS" on page 62. To clear the BIOS password(s): 1 Follow the instructions in "Preventing static electricity discharge" on page 30. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server. 2 Follow the instructions in "Opening the server case" on page 31. Caution Moving the jumper while the power is on can damage your server. Always turn off the server and unplug the power cords and all other cables before changing the jumper. 63