Gateway E-9525R Gateway E-9525R Server User Guide - Page 51
Important, Determine which fan group needs to be replaced by noting which fans are not operating.
View all Gateway E-9525R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
www.gateway.com 3 Determine which fan group needs to be replaced by noting which fans are not operating. 4 Pull up the locking handle (4) on the system fan, then lift the fan group (5) from the fan cage in the chassis. Important Make sure that the arrows on top of the fans indicating airflow point to the back of the chassis. The fan cable should exit the fan module toward the back of the chassis. 5 Insert the replacement fan group into the fan cage and press down the locking handle to secure the fan group in place. 6 Follow the instructions in "Closing the server case" on page 32. To replace the system fan and fan cage assembly: Important Both system fan cages are replaced in a similar manner. 1 Follow the instructions in "Preventing static electricity discharge" on page 30. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server. 2 Follow the instructions in "Opening the server case" on page 31. 3 Remove the fan duct by lifting it out of the chassis. 45