Gateway E-9525R Gateway E-9525R Server User Guide - Page 40
Installing Components
View all Gateway E-9525R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
CHAPTER 4: Installing Components 7 Lift the locking tab (3) on the back of the optical drive tray, then push the optical drive (4) and tray out of the bay. 8 Lift the optical drive (5), then pull it from the tray (6). 9 Unscrew the two screws (5) holding the optical drive interface board on the back of the optical drive, then remove the interface board. 10 Using the two screws you just removed, attach the optical drive interface board to the back of the new optical drive. 11 Align the optical drive with the two clips on the left side of the optical drive tray, then press the optical drive into place in the tray. 12 Insert the optical drive tray into the bay in the media cage until it clicks into place. 13 Insert the media cage into the assembly bay in the chassis. 34