Gateway E-9525R Gateway E-9525R Server User Guide - Page 38
Closing the server case
View all Gateway E-9525R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CHAPTER 4: Installing Components Closing the server case To close the server case: 1 Make sure that all of the internal cables are arranged inside the case so they will not be pinched when you close the case. 2 Place the top cover (1) on the server, then slide it forward until it clicks into place. Important The hard drive carriers shown in these illustrations may look different than the actual hard drive carriers in your server. 3 Replace the screw (2) to hold the top cover in place. 4 Reconnect the power cord(s) and all other cables. 32
CHAPTER 4: Installing Components
32
Closing the server case
To close the server case:
1
Make sure that all of the internal cables are arranged inside the case so they will not be
pinched when you close the case.
2
Place the top cover (1) on the server, then slide it forward until it clicks into place.
3
Replace the screw (2) to hold the top cover in place.
4
Reconnect the power cord(s) and all other cables.
Important
The hard drive carriers shown in these illustrations may look different than
the actual hard drive carriers in your server.