Gateway E-9525R Gateway E-9525R Server User Guide - Page 42
Secure the assembly by tightening the thumbscrew you previously loosened.
View all Gateway E-9525R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
CHAPTER 4: Installing Components 7 Lift the locking tab (3) on the back of the tape drive tray, then push the tape drive (4) and tape drive bracket out of the tray. 8 Unscrew the four mounting screws (5) holding the tape drive in the tape drive bracket, then lift the tape drive out of the bracket. 9 Put the new tape drive into the drive bracket and secure with the four screws you removed previously (if you are installing a new tape drive, the screws and bracket are included with the tape drive installation kit). 10 Push the new tape drive and drive bracket into the tape drive tray, then push down the locking tab. 11 Insert the media cage into the assembly bay in the chassis. 12 Secure the assembly by tightening the thumbscrew you previously loosened. 13 Connect the data and power cables to the back of the tape drive. 14 Reinstall the large fan cage by following the instructions in "Replacing system fans" on page 44. 15 Follow the instructions in "Closing the server case" on page 32. 16 Reinstall the bezel, if required, by snapping it into place on the front of the chassis. 17 Reconnect all power cords and peripheral device cables, then turn on the server. 36