HP 353803-B22 HP StorageWorks 1000 Modular Smart Array maintenance and service - Page 82
Verifying proper operation, rmware is installed. See
UPC - 808736781619
View all HP 353803-B22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
1 2 15595 3. If necessary, power on the MSA as instructed in Connecting the Power and Applying power to the MSA. NOTE: Each time a system with two controllers is powered on or restarted, or if a second controller is hot-plugged into a single-controller configuration, the firmware versions on the controllers are compared. If the firmware versions on the two controllers are not the same, the controller LCD panel prompts to clone the firmware from the controller with the latest version onto the other controller. For information, see Cloning controller firmware. Verifying proper operation After replacing the array controller, controller cache module, or cache module battery pack, verify that: • The controller Heartbeat LED is blinking. • The controller Fault LED is off. • No new error messages are displayed on the array controller LCD display panel. After installing a new array controller, verify that the latest available firmware is installed. See Array controller firmware for the following instructions: • Determining the currently-installed firmware version • Updating controller firmware • Cloning controller firmware • Recovering corrupted firmware 82 Customer replaceable components