HP 5550 User Guide - Page 144

Finishing When the optional staple finisher is installed, job separation, offset and staple printing can be performed. For the installation procedure, refer to "Staple Finisher" on page 246. Settings can be specified for job separation, offset and staple printing by selecting JOB SEPARATION or FINISHING in PAPER MENU. " Use the following paper with job separation, offset and staple printing. Media Types Plain paper, Recycled paper and Letterhead (changes according to the paper thickness) Media Size Width: 182 to 216 mm Length: 257 to 355.6 mm " Paper is fed to the main output tray with job separation, offset and sta- ple printing. Job Separation Printing When paper is fed to the main output tray, the pages are fed out shifted as shown below. " When paper is fed to the sub output tray, the pages are fed out stacked on top of each other without begin shifted. " If staple printing is selected, the pages are stapled together before being fed out. 1 2 3 1 2 3 4 1 2 130 Finishing