HP 5550 User Guide - Page 85

" All factory default values are shown in bold. PAPER Settings TRAY1/TRAY2/TRAY3/TRAY4 SOURCE Select the Lower Feeder Unit that is used for camera direct printing. " TRAY3 and TRAY4 appear only if the optional lower feeder units are installed. LAYOUT Settings 1-UP/2-UP/3-UP/4-UP/6-UP/8-UP Specify the number of images printed on a single sheet of media. When set to 1-UP, only one image will be printed on a single sheet of media. PAPER Settings STANDARD/MINIMUM MARGIN Select the size of the media margins (area that is not printed in). If STANDARD is selected, the standard media margin size is specified. If MINIMUM is selected, the media margins are reduced. IMAGE QUALITY BRIGHT- Settings -15%/-10%/-5%/0%/+5%/+10%/ NESS +15% The brightness of the printed image can be adjusted. CONTRAST Settings -15%/-10%/-5%/0%/+5%/+10%/ +15% The contrast of the image can be adjusted. ECONOMY Settings ON/OFF PRINT Select whether to print graphics with a reduced density by reducing the amount of toner that is used. If ON is selected, the amount of toner used is reduced when printing. If OFF is selected, the amount of toner used is not reduced when printing. " If GLOSSY MODE is set to ON, the amount of toner used is not reduced when printing, even if ON was selected for this menu item. Configuration Menu Overview 71