HP 5550 User Guide - Page 29
Windows Me/98SE (KONICA MINOLTA mc5570 PPD) (KONICA MINOLTA mc5550 PPD), Apply, Start, Settings
UPC - 808736333603
View all HP 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
8 Click Apply. 9 Click OK. Windows Me/98SE (KONICA MINOLTA mc5570 PPD) (KONICA MINOLTA mc5550 PPD) 1 Choose the driver's properties as follows: - From the Start menu, choose Settings and then Printers to display the Printers directory. Right-click the KONICA MINOLTA mc5570 PPD printer icon or the KONICA MINOLTA mc5550 PPD printer icon and choose Properties. 2 Select the Device Options tab. 3 Check that the installed options are correctly listed. If not, proceed with the next step. Otherwise, continue with step 6. 4 From the Installable options list, select an option, one at a time, and then select Enable or Disable from the Change setting for: menu. " If VMOption is selected, select 256 MB, 512 MB, 768 MB or 1024 MB, according to the installed memory. The factory default setting is 256 MB. " If Paper Source Unit is selected, select Disable, Unit 3 or Unit 3 + Unit 4, according to the installed lower feeder unit. " If Storage is selected, select None, CF (1 GB Under), CF (1 GB Over), HDD, HDD + CF (1 GB Under), or HDD + CF (1 GB Over), according to the installed CompactFlash card and hard disk drive. 5 Click Apply. 6 Select the default settings for your printer, such as the default media for- mat you use, on the appropriate tabs. 7 Click Apply. 8 Click OK. Selecting Driver Options/Defaults (for Windows) 15