HP 5550 User Guide - Page 235

Error Messages (Operator Call: ) This message... ADJUST TRAY1 COVER OPEN DUPLEX COVER COVER OPEN FINISHER COVER COVER OPEN FRONT COVER COVER OPEN SIDE COVER COVER OPEN STAPLER COVER COVER OPEN TRAYX COVER COVER OPEN UPPER COVER FUSER MISSING CHECK UNIT HOLD JOB ERROR UNABLE TO STORE JOB HOLD JOB ERROR "OPTIONAL" PRESS CANCEL MANUAL EMPTY "SIZE" "MEDIA" means... do this... Tray 1 is removed from the printer. The duplex cover is open. Install Tray 1 Close the duplex cover. The finisher cover is Close the finisher cover. open. The printer's front cover is open. Close the front cover. The printer's right Close the right side side cover is open. cover. The stapler cover is Close the stapler cover. open. The right side cover of Tray X (Tray 3 or 4) is open. The upper cover is open. Close the right side cover of the tray. Close the upper cover. The fuser unit is not installed. Contact Technical Support with the error information. The specified print job Print jobs can be saved saved on the hard only if a hard disk is disk is sent while the installed. If desired, hard disk is not install a hard disk. installed. When printing a Change the printer con- stored job, the printer figuration to that when configuration was the job was stored. changed since the job was stored. Tray 1 was specified Load the correct media with the printer driver into Tray 1. as Manual Feed for printing, but Tray 1 is empty. Status, Error, and Service Messages 221