HP 5550 User Guide - Page 242
Introduction, Antistatic Protection
UPC - 808736333603
View all HP 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Introduction Note Use of accessories not manufactured or supported by KONICA MINOLTA will void your warranty. " This chapter provides information about the following accessories. Dual In-Line Memory Module (DIMM) Duplex Option Lower Feeder Unit (Tray 3/4) Hard Disk Kit Compact Flash 256 MB, 512 MB DIMM (DDR-SDRAM, 266 MHz, 184 pins, No ECC, Unbuffered, CL=2 or 2.5) Auto duplexing 500-sheet tray included 40 GB Hard Disk 256 MB, 512 MB, 1 GB Note Installing accessories always requires that the printer and accessories are turned off and unplugged during installation. Antistatic Protection Note It's very important to protect the printer controller board from electrostatic damage while performing any task involving the controller board. Turn off all power switches first. If an antistatic wrist strap is provided in your printer option kit, attach one end of it to your wrist and the other end to the bare metal chassis on the back of your printer. Never attach the wrist strap to any piece of equipment with an electrical current present. Plastic, rubber, wood, painted metal surfaces, and telephones are not acceptable grounding points. If you don't have an antistatic wrist strap, discharge your body's static electric charge by touching a grounded surface before you handle any printer boards or components. Also avoid walking around after grounding yourself. 228 Introduction