HP 5940 User Guide - (Macintosh) - Page 59
Paper problems, Resume, Printer does not feed paper, Printer ejects paper
View all HP 5940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
6. If the paper jam cannot be removed from the back of the printer, raise the printer cover, remove the paper jam from the front of the printer, and then lower the cover. Caution Remove the paper jam carefully as it is possible to damage the printer when removing paper from the front. 7. Turn on the printer, and then press the Resume button. 8. Reprint the document. Note If paper jams occur frequently, try using a heavier paper. See the reference guide for paper weight specifications. Paper problems Printer does not feed paper Try one or more of the following solutions: ● Reduce the number of sheets in the In tray. ● Remove the paper from the In tray, and then reload it. ● Use a different type of paper. Printer ejects paper If the printer ejects the paper, try one of the following solutions: ● Move the printer away from direct sunlight. The printer might have been placed in direct sunlight, which can affect the Automatic Paper-Type Sensor. ● Select a paper type other than Automatic. ● If you are performing a color calibration, install both the tri-color and the photo print cartridges. ● If you are printing a borderless document and the Resume and Print Cartridge Status lights are flashing, follow the borderless printing guidelines. ● Verify that the protective piece of plastic tape has been removed from the print cartridges. ● If you are printing a borderless document and the Resume light and a Print Cartridge Status light are flashing, you might be trying to print a borderless document with only the black print cartridge installed. When printing a borderless document, always have the tri-color print cartridge and a black or photo print cartridge installed. User's guide 57