HP 610 Compaq 615 Notebook PC and Compaq 610 Notebook PC - Maintenance and Ser - Page 61

Removal and replacement procedures Optical drive ✎ The optical drive spare part kit includes an optical drive bezel and bracket. Description For use only on computer models equipped with an AMD processor: ■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe ■ DVD-ROM Drive For use only on computer models equipped with an Intel processor: ■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe ■ DVD-ROM Drive Spare part number 538406-001 575200-001 538442-001 538441-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). Remove the optical drive: 1. Position the computer with the front toward you. 2. Remove the Phillips PM2.5×8.0 screw 1 that secures the optical drive to the computer. 3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access 2 and press the tab to the left to release the optical drive from the computer. 4. Remove the optical drive 3 from the optical drive bay. 4-18 Maintenance and Service Guide