HP 610 Compaq 615 Notebook PC and Compaq 610 Notebook PC - Maintenance and Ser - Page 76
is accessible., back at an angle until the TouchPad cable
UPC - 884962591246
View all HP 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Removal and replacement procedures 3. Turn the computer right-side up with the front toward you. 4. Remove the two Phillips PM2.5×6.0 screws 1 and the Phillips PM2.0×4.0 screw 2 that secure the top cover to the base enclosure. 5. Lift the rear edge 1 of the top cover until it rests at an angle. 6. Slide the top cover 2 back at an angle until the TouchPad cable 3 is accessible. 7. Disconnect the TouchPad cable from the system board. 8. Remove the top cover 4 by lifting it straight up. Reverse this procedure to install the top cover. Maintenance and Service Guide 4-33
Removal and replacement procedures
Maintenance and Service Guide
4–33
3. Turn the computer right-side up with the front toward you.
4.
Remove the two Phillips PM2.5×6.0 screws
1
and the Phillips PM2.0×4.0 screw
2
that secure the top cover to
the base enclosure.
5. Lift the rear edge
1
of the top cover until it rests at an angle.
6. Slide the top cover
2
back at an angle until the TouchPad cable
3
is accessible.
7. Disconnect the TouchPad cable from the system board.
8. Remove the top cover
4
by lifting it straight up.
Reverse this procedure to install the top cover.