HP 610 Compaq 615 Notebook PC and Compaq 610 Notebook PC - Maintenance and Ser - Page 67
Speaker, Release the speaker cable from the clips
UPC - 884962591246
View all HP 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removal and replacement procedures Speaker Description Speaker Spare part number 538453-001 Before removing the speaker, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the keyboard and switch cover (see "Keyboard and switch cover" on page 4-20). Remove the speaker: 1. Disconnect the speaker cable 1 from the system board. 2. Release the speaker cable from the clips 2 built into the top cover. 3. Remove the two Phillips PM2.5×4.0 screws 3 that secure the speaker to the top cover. 4. Remove the speaker 4. Reverse this procedure to install the speaker. 4-24 Maintenance and Service Guide