HP 610 Compaq 615 Notebook PC and Compaq 610 Notebook PC - Maintenance and Ser - Page 64
Remove the keyboard and switch cover, Remove the following screws
UPC - 884962591246
View all HP 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Removal and replacement procedures Description Switch cover (includes power button board and cable) Spare part number 538452-001 Before removing the keyboard and switch cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). Remove the keyboard and switch cover: 1. Position the computer with the front toward you. 2. Remove the following screws: 1 Two Phillips PM2.5×8.0 screws that secure the keyboard to the computer 2 Two slotted Torx T8M2.5×8.0 screws that secure the switch cover to the computer 3 Three Phillips PM2.0×3.0 broadhead screws that secure the switch cover to the computer Maintenance and Service Guide 4-21